Curtain partitions screen, isolate, enclose and protect any area of any size
Commonly used in welding and paint shops, but can be used anywhere
Brackets made of 16-gauge steel and designed for wall or ceiling mount but can be self supported by floor stands
Large selection of drape material can be utilized with any curtain DESIGN YOUR OWN CURTAIN Curtains - Take exact length of area of enclosure and add 10% fullness for proper draping. Then multiply length and height to obtain square footage. Curtains hemmed on top and two sides 2" pocket on bottom side. Brass grommets spaced every 12". Refer to model number for square footage cost of fabric required. Track - Straight and curved. Straight track available in 5' and 10' lengths. Curved corners are 3' long with 2' radius welded splicer on each end included. When using a curved track, length is increased by 2', e.g. 8' straight track with a curve at each end overall = 12'. Carriers - Since curtains are made to any length be sure to add one additional carrier to actual length of curtain ordered. For example every 10' of curtain is fabricated with 11 grommets on top side. Therefore 11 carriers are required. A double carrier should be used at the beginning of each curtain. Steel roller carriers are permanently lubricated enclosed bearings. Clamps - Available for flush ceiling/beam mounting and floor mounting. Clamps can also be used as track splicers. All fasten with supplied Allen bolts. Order sufficient clamps to support track every 5'. When free standing uprights are required, be sure to specify clamps for fastening track on posts KB032 (Posts are required every 8'). Other custom heights on application. Note: All posts should be lagged or welded to floor as required.
End Connector Fastener, Down